Single Service
Auger
/ Drilling depth:700mm (Customizable) / / Maximum torque:750N·M (Customizable) / / Drilling diameter:Φ200mm (Customizable) / / Material:Q345 Wear-resistant steel /
Spiral drill is a type of spiral blade drilling machine, which includes a drilling machine frame, a slide on the frame, and a gearbox that can slide up and down along the slide. The gearbox is connected to the power input shaft and power output shaft. The other end is connected to a hydraulic motor, the other end of the power output shaft is connected to a drill pipe, and the lower end of the drill pipe is connected to a drill bit, which can be widely used in orchard planting, municipal engineering, and so on.
An auger is an accessory used to modify an excavator into a Auger. Scope of application: drilling for power poles, building piling, photovoltaic power generation, tree planting, seedling cultivation, and other drilling projects. Advantages: Drilling does not require soil cleaning, and can be completed by one person. After drilling to depth, the drill pipe is lifted upwards, and the soil adheres to the spiral blades, rarely falling back. After lifting, simply rotate the drill pipe back and forth, paying attention to the natural fall of the soil. It can be operated by one person, driven from the car to the opening, and can be moved while drilling. Greatly improve work efficiency. If you are proficient in operation, you can drill several times a minute.
Structure diagram of Auger for small excavator accessories
Structure diagram of Auger for small excavator accessories
Auger are suitable for various occasions
Auger are suitable for various occasions, such as municipal, garden, street lamp planting, etc
Auger detail display
Augerdetail display
Small excavator equipped with Auger
Using a Auger on Hard Ground
In the coming April 2024, we will bring our mini excavators MY10 and MY13 to the Brazilian exhibition to showcase our products and technologies. Our booth numbers are A170-21 and A170-22, we sincerely invite you to visit us.
In the daily use of small mini excavators, maintenance and repair are an indispensable part. This can not only extend the life of the machinery, but also ensure work efficiency. So, how to perform correct daily maintenance and repair?
First, use a ripper to excavate and loosen the soil, peel off the soil layer and weathered stone layer, and then use a quick connector to change the bucket to excavate and load the soil, which greatly improves the construction efficiency.
EP 1 ton mini excavator MY10A, after one year of customer feedback, this machine not only runs smoothly, but also requires almost no major repairs. Its power system is strong and stable, and it is not easy to fail even under continuous high-intensity working conditions.